FFC
HYGIENIC FUNGUS FREE COATING
Seal Face hygienic fungus free coating is Hi-gloss, Seamless finish. It can be applied on to most surfaces, to provide a dustproof, and hard wearing surface and Non porous. It also provides excellent resistance to oil grease, moisture, dirt, etc. It is easy to clean and facilitates easy maintenance on the coated area and also extends their life.
Advantage
It gives excellent resistance to dirt, dust and other environmental pollutants.
Very easy to clean and maintain and easy to repair.
Easy to mix and apply, seamless coating by brush/mop/roffer.
Can be used in homes, hospitals, schools.
Application
As a protective coat for walls where high abrasion resistance, moisture resistance, dust free and hygienic conditions are needed. It can be used very effectively in hospitals, operation theatres, pharmaceuticals, food or drinks industries, abattoirs, electronics factories, warehouses, workshops & sports centers. Can also be used in large water reservoirs, spray ponds etc.; as a heavy-duty water proofing coating.
Preparation
New concrete, plastered surfaces should be cured for 28 days prior to coating. Old/Existing surfaces should be clean, firm and dry. All laitance curing membranes / coatings should be removed. The surface should be free from dust, loose dirt; oil, grease, etc., and leveled.
All pot holes, uneven surfaces, cracks, crevices should be repaired with Seal Face Paste. Very oily surfaces to be chemically cleaned with dilute HCL acid and then rinsed thoroughly and allowed to dry before applying coat.
Method of application
Once the surface is prepared as per the instructions, the surface should be very light coating 1 : 06 mix system which is supplied in two packs. Stir the individual contents and then mix them thoroughly before use. Allow first coat to dry for about '/z hour and then commence applying the second coat of interval between each coat. Intercoating interval should not exceed more than 2 hours.
Cleaning of tools
Clean hands tool etc. with Aceton. The use of barrier creams is also recommended.
Storage
Store in a cool, dry place away from direct sunlight. Do not mix the materials and store as it will cure and gel.
Precaution
Avoid inhalation of solvent vapours and avoid direct contact with skin and eyes. Provide proper ventilation when working with solvent borne coatings in confined spaces or stagnant air. Provide respiratory skin and eyes protection. Don't smoke in the vicinity.
  Packing
4 Kg. 10 Kg. 20 Kg.
Product Data

SEAL FACE HYGIENIC FUNGUS FREE COATINGS

  Colour
  Available in 137 shades
  Appearance
  Free flowing paste
  Finish
  Smooth-semi glossy-HI gloss
  Mixing Ratio
  1:0.6
  Solids %
  90 5% (Mixed)
  Pot life of mixture
  2 - 3 Hours
  Drying time
  Surface dry
  1 - 2 hours
  Hard dry
  8 - 10 hours Recommended
  Coats
  Two
  Coverage
  1st Coat 110-120 Sq.Ft./ Kg./Coat
  (Smooth Concrete)
  2nd Coat 140-160 Sq.Ft./ Kg./Coat
  Film thickness
  125-150 Mics. per coat
  Scratch Hardness
  Excellent
  Heat Resistance
  120-140C
  Flash Point
  Above 30C
  Film Property
  Flexible yet tough